[20211108_11:33:07] ### qDDR Version V1.09 20210630 [20211108_11:33:07] ### In [20211108_11:33:07] ### ddrconfig:0 [20211108_11:33:07] ### LP4 MR14:0x4d [20211108_11:33:07] ### LPDDR4, 324MHz [20211108_11:33:07] ### BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB [20211108_11:33:07] ### tdqss: cs0 dqs0: 385ps, dqs1: 313ps, dqs2: 409ps, dqs3: 289ps, [20211108_11:33:07] ### [20211108_11:33:07] ### change to: 324MHz [20211108_11:33:07] ### PHY drv:clk:38,ca:38,DQ:30,odt:0 [20211108_11:33:07] ### vrefinner:41%, vrefout:41% [20211108_11:33:07] ### dram drv:40,odt:0 [20211108_11:33:07] ### clk skew:0x58 [20211108_11:33:07] ### [20211108_11:33:07] ### change to: 528MHz [20211108_11:33:07] ### PHY drv:clk:38,ca:38,DQ:30,odt:60 [20211108_11:33:07] ### vrefinner:16%, vrefout:41% [20211108_11:33:07] ### dram drv:40,odt:0 [20211108_11:33:07] ### clk skew:0x72 [20211108_11:33:07] ### [20211108_11:33:07] ### change to: 780MHz [20211108_11:33:07] ### PHY drv:clk:38,ca:38,DQ:30,odt:60 [20211108_11:33:07] ### vrefinner:16%, vrefout:41% [20211108_11:33:07] ### dram drv:40,odt:0 [20211108_11:33:07] ### clk skew:0x58 [20211108_11:33:07] ### [20211108_11:33:07] ### change to: 1560MHz(final freq) [20211108_11:33:07] ### PHY drv:clk:38,ca:38,DQ:30,odt:60 [20211108_11:33:07] ### vrefinner:16%, vrefout:29% [20211108_11:33:07] ### dram drv:40,odt:80 [20211108_11:33:07] ### vref_ca:00000068 [20211108_11:33:07] ### clk skew:0x6 [20211108_11:33:07] ### cs 0: [20211108_11:33:07] ### the read training result: [20211108_11:33:07] ### DQS0:0x34, DQS1:0x35, DQS2:0x39, DQS3:0x31, [20211108_11:33:07] ### min : 0xf 0x10 0x12 0x10 0x2 0x6 0x8 0x4 , 0xf 0xd 0x3 0x2 0x12 0xc 0x10 0xa , [20211108_11:33:07] ### 0x14 0x13 0x10 0xb 0x5 0x2 0x5 0x5 , 0xe 0x8 0x8 0x1 0x11 0x10 0xd 0xf , [20211108_11:33:07] ### mid :0x2a 0x2b 0x2d 0x29 0x1d 0x21 0x24 0x1f ,0x28 0x27 0x1e 0x1d 0x2b 0x27 0x2a 0x25 , [20211108_11:33:07] ### 0x30 0x2f 0x2a 0x27 0x21 0x1e 0x20 0x20 ,0x28 0x23 0x22 0x1b 0x2a 0x2b 0x27 0x2a , [20211108_11:33:07] ### max :0x46 0x47 0x48 0x43 0x38 0x3d 0x41 0x3b ,0x42 0x42 0x39 0x38 0x45 0x42 0x45 0x41 , [20211108_11:33:07] ### 0x4c 0x4c 0x44 0x43 0x3d 0x3b 0x3b 0x3b ,0x43 0x3f 0x3d 0x36 0x44 0x46 0x42 0x45 , [20211108_11:33:07] ### range:0x37 0x37 0x36 0x33 0x36 0x37 0x39 0x37 ,0x33 0x35 0x36 0x36 0x33 0x36 0x35 0x37 , [20211108_11:33:07] ### 0x38 0x39 0x34 0x38 0x38 0x39 0x36 0x36 ,0x35 0x37 0x35 0x35 0x33 0x36 0x35 0x36 , [20211108_11:33:07] ### the write training result: [20211108_11:33:07] ### DQS0:0x52, DQS1:0x44, DQS2:0x57, DQS3:0x3f, [20211108_11:33:07] ### min :0xa4 0xa9 0xaa 0xa6 0x97 0x9c 0x9e 0x9f 0x9d ,0x92 0x92 0x8a 0x8a 0x96 0x94 0x93 0x92 0x8d , [20211108_11:33:07] ### 0xa8 0xa9 0xa1 0xa2 0x9a 0x97 0x99 0x9e 0x9e ,0x8f 0x8f 0x8c 0x88 0x93 0x95 0x8f 0x95 0x8b , [20211108_11:33:07] ### mid :0xc0 0xc5 0xc6 0xc1 0xb1 0xb6 0xba 0xb8 0xb7 ,0xad 0xac 0xa3 0xa2 0xb0 0xad 0xad 0xab 0xa7 , [20211108_11:33:07] ### 0xc5 0xc5 0xbc 0xbd 0xb4 0xb1 0xb3 0xb7 0xb9 ,0xab 0xa9 0xa6 0xa1 0xad 0xaf 0xa9 0xb0 0xa5 , [20211108_11:33:07] ### max :0xdc 0xe1 0xe2 0xdc 0xcc 0xd1 0xd6 0xd2 0xd2 ,0xc9 0xc7 0xbc 0xbb 0xca 0xc7 0xc8 0xc4 0xc1 , [20211108_11:33:07] ### 0xe2 0xe2 0xd8 0xd8 0xcf 0xcc 0xce 0xd1 0xd5 ,0xc7 0xc3 0xc0 0xbb 0xc8 0xc9 0xc4 0xcb 0xc0 , [20211108_11:33:07] ### range:0x38 0x38 0x38 0x36 0x35 0x35 0x38 0x33 0x35 ,0x37 0x35 0x32 0x31 0x34 0x33 0x35 0x32 0x34 , [20211108_11:33:07] ### 0x3a 0x39 0x37 0x36 0x35 0x35 0x35 0x33 0x37 ,0x38 0x34 0x34 0x33 0x35 0x34 0x35 0x36 0x35 , [20211108_11:33:07] ### CA Training result: [20211108_11:33:07] ### cs:0 min :0x50 0x48 0x47 0x39 0x49 0x37 0x48 ,0x5c 0x4d 0x4d 0x42 0x4b 0x3f 0x4f , [20211108_11:33:07] ### cs:0 mid :0x8b 0x89 0x80 0x7b 0x83 0x7a 0x71 ,0x95 0x8e 0x85 0x82 0x84 0x7f 0x76 , [20211108_11:33:07] ### cs:0 max :0xc7 0xcb 0xb9 0xbd 0xbd 0xbd 0x9b ,0xce 0xcf 0xbd 0xc2 0xbd 0xbf 0x9e , [20211108_11:33:07] ### cs:0 range:0x77 0x83 0x72 0x84 0x74 0x86 0x53 ,0x72 0x82 0x70 0x80 0x72 0x80 0x4f , [20211108_11:33:07] ### out [20211108_11:33:07] ### U-Boot SPL board init [20211108_11:33:07] ### U-Boot SPL 2017.09-ga1f6fc00a0-210413 #ldq (Apr 13 2021 - 11:35:00) [20211108_11:33:07] ### unknown raw ID phN [20211108_11:33:07] ### unrecognized JEDEC id bytes: 00, 00, 00 [20211108_11:33:07] ### Trying to boot from MMC2 [20211108_11:33:07] ### MMC error: The cmd index is 1, ret is -110 [20211108_11:33:07] ### Card did not respond to voltage select! [20211108_11:33:07] ### mmc_init: -95, time 10 [20211108_11:33:07] ### spl: mmc init failed with error: -95 [20211108_11:33:07] ### Trying to boot from MMC1 [20211108_11:33:07] ### SPL: A/B-slot: _a, successful: 0, tries-remain: 7 [20211108_11:33:07] ### ## Verified-boot: 0 [20211108_11:33:07] ### ## Checking atf-1 0x00040000 ... sha256+ OK [20211108_11:33:07] ### ## Checking uboot 0x00a00000 ... sha256+ OK [20211108_11:33:07] ### ## Checking fdt 0x00b1eb40 ... sha256+ OK [20211108_11:33:07] ### ## Checking atf-2 0xfdcc9000 ... sha256+ OK [20211108_11:33:07] ### ## Checking atf-3 0xfdcd0000 ... sha256+ OK [20211108_11:33:07] ### ## Checking optee 0x08400000 ... sha256+ OK [20211108_11:33:07] ### Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000) [20211108_11:33:07] ### Total: 222.260 ms [20211108_11:33:07] ### [20211108_11:33:07] ### INFO: Preloader serial: 2 [20211108_11:33:07] ### NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl [20211108_11:33:07] ### NOTICE: BL31: Built : 10:51:13, Jul 15 2021 [20211108_11:33:07] ### INFO: GICv3 without legacy support detected. [20211108_11:33:07] ### INFO: ARM GICv3 driver initialized in EL3 [20211108_11:33:07] ### INFO: pmu v1 is valid [20211108_11:33:07] ### INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz [20211108_11:33:07] ### INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz [20211108_11:33:07] ### INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz [20211108_11:33:07] ### INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz [20211108_11:33:07] ### INFO: Using opteed sec cpu_context! [20211108_11:33:07] ### INFO: boot cpu mask: 0 [20211108_11:33:07] ### INFO: BL31: Initializing runtime services [20211108_11:33:07] ### INFO: BL31: Initializing BL32 [20211108_11:33:07] ### I/TC: [20211108_11:33:07] ### I/TC: Start rockchip platform init [20211108_11:33:07] ### I/TC: Rockchip release version: 1.0 [20211108_11:33:07] ### I/TC: OP-TEE version: 3.6.0-307-g0b06ae94 #1 Fri May 7 01:52:27 UTC 2021 aarch64 [20211108_11:33:07] ### I/TC: Initialized [20211108_11:33:07] ### INFO: BL31: Preparing for EL3 exit to normal world [20211108_11:33:07] ### INFO: Entry point address = 0xa00000 [20211108_11:33:07] ### INFO: SPSR = 0x3c9 [20211108_11:33:07] ### [20211108_11:33:07] ### [20211108_11:33:07] ### U-Boot 2017.09 (Oct 27 2021 - 13:46:20 +0800) [20211108_11:33:07] ### [20211108_11:33:07] ### Model: BPI-R2PRO RK3568 Board [20211108_11:33:07] ### PreSerial: 2, raw, 0xfe660000 [20211108_11:33:07] ### DRAM: 2 GiB [20211108_11:33:07] ### Sysmem: init [20211108_11:33:07] ### Relocation Offset: 7d35a000 [20211108_11:33:07] ### Relocation fdt: 7b9f8830 - 7b9fecf0 [20211108_11:33:07] ### CR: M/C/I [20211108_11:33:07] ### Using default environment [20211108_11:33:07] ### [20211108_11:33:07] ### dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0 [20211108_11:33:07] ### Bootdev(atags): mmc 0 [20211108_11:33:07] ### MMC0: HS200, 200Mhz [20211108_11:33:07] ### PartType: EFI [20211108_11:33:07] ### boot mode: None [20211108_11:33:07] ### FIT: no signed, no conf required [20211108_11:33:07] ### DTB: rk-kernel.dtb [20211108_11:33:07] ### HASH(c): OK [20211108_11:33:07] ### I2c0 speed: 100000Hz [20211108_11:33:07] ### PMIC: RK8090 (on=0x10, off=0x00) [20211108_11:33:07] ### vdd_logic init 900000 uV [20211108_11:33:07] ### vdd_gpu init 900000 uV [20211108_11:33:07] ### vdd_npu init 900000 uV [20211108_11:33:07] ### io-domain: OK [20211108_11:33:07] ### Could not find baseparameter partition [20211108_11:33:07] ### Model: BananaPi RK3568-BPI-R2PRO-PC HDMI (Linux) [20211108_11:33:07] ### Rockchip UBOOT DRM driver version: v1.0.1 [20211108_11:33:07] ### xfer: num: 2, addr: 0x50 [20211108_11:33:07] ### xfer: num: 2, addr: 0x50 [20211108_11:33:08] ### Monitor has basic audio support [20211108_11:33:08] ### Could not find baseparameter partition [20211108_11:33:08] ### mode:1920x1080 [20211108_11:33:08] ### Detailed mode clock 148500 kHz, flags[5] [20211108_11:33:08] ### H: 1920 2008 2052 2200 [20211108_11:33:08] ### V: 1080 1084 1089 1125 [20211108_11:33:08] ### bus_format: 2025 [20211108_11:33:08] ### VOP update mode to: 1920x1080p0, type: HDMI0 for VP0 [20211108_11:33:08] ### VOP have 1 active VP [20211108_11:33:08] ### vp0 have layer nr:6[0 2 4 1 3 5 ], primary plane: 4 [20211108_11:33:08] ### vp1 have layer nr:0[], primary plane: 0 [20211108_11:33:08] ### vp2 have layer nr:0[], primary plane: 0 [20211108_11:33:08] ### VOP VP0 enable Smart0[568x501->568x501@676x289] fmt[1] addr[0x7df00036] [20211108_11:33:08] ### CEA mode used vic=16 [20211108_11:33:08] ### final pixclk = 148500000 tmdsclk = 148500000 [20211108_11:33:08] ### PHY powered down in 0 iterations [20211108_11:33:08] ### PHY PLL locked 1 iterations [20211108_11:33:08] ### PHY powered down in 0 iterations [20211108_11:33:08] ### PHY PLL locked 1 iterations [20211108_11:33:08] ### sink has audio support [20211108_11:33:08] ### hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500 [20211108_11:33:08] ### CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) [20211108_11:33:08] ### apll 816000 KHz [20211108_11:33:08] ### dpll 780000 KHz [20211108_11:33:08] ### gpll 1188000 KHz [20211108_11:33:08] ### cpll 1000000 KHz [20211108_11:33:08] ### npll 1200000 KHz [20211108_11:33:08] ### vpll 24000 KHz [20211108_11:33:08] ### hpll 148000 KHz [20211108_11:33:08] ### ppll 200000 KHz [20211108_11:33:08] ### armclk 816000 KHz [20211108_11:33:08] ### aclk_bus 150000 KHz [20211108_11:33:08] ### pclk_bus 100000 KHz [20211108_11:33:08] ### aclk_top_high 500000 KHz [20211108_11:33:08] ### aclk_top_low 400000 KHz [20211108_11:33:08] ### hclk_top 150000 KHz [20211108_11:33:08] ### pclk_top 100000 KHz [20211108_11:33:08] ### aclk_perimid 300000 KHz [20211108_11:33:08] ### hclk_perimid 150000 KHz [20211108_11:33:08] ### pclk_pmu 100000 KHz [20211108_11:33:08] ### Net: FEC: can't find phy-handle [20211108_11:33:08] ### eth1: ethernet@fe010000, eth0: ethernet@fe2a0000 [20211108_11:33:08] ### Hit key to stop autoboot('CTRL+C'): 0 [20211108_11:33:08] ### ## Booting FIT Image at 0x7a200000 with size 0x015f7800 [20211108_11:33:08] ### Fdt Ramdisk skip relocation [20211108_11:33:08] ### ## Loading kernel from FIT Image at 7a200000 ... [20211108_11:33:08] ### Using 'conf' configuration [20211108_11:33:08] ### optee api revision: 2.0 [20211108_11:33:08] ### TEEC: Waring: Could not find security partition [20211108_11:33:08] ### ## Verified-boot: 0 [20211108_11:33:08] ### Trying 'kernel' kernel subimage [20211108_11:33:08] ### Description: unavailable [20211108_11:33:08] ### Type: Kernel Image [20211108_11:33:08] ### Compression: uncompressed [20211108_11:33:08] ### Data Start: 0x7a21ee00 [20211108_11:33:08] ### Data Size: 22906888 Bytes = 21.8 MiB [20211108_11:33:08] ### Architecture: AArch64 [20211108_11:33:08] ### OS: Linux [20211108_11:33:08] ### Load Address: 0x00280000 [20211108_11:33:08] ### Entry Point: 0x00280000 [20211108_11:33:08] ### Hash algo: sha256 [20211108_11:33:08] ### Hash value: e490877910a63bab3a3ebea175f78453b6171d81a897ac3e2ef42c3d019ec02e [20211108_11:33:08] ### Verifying Hash Integrity ... sha256+ OK [20211108_11:33:08] ### ## Loading fdt from FIT Image at 7a200000 ... [20211108_11:33:08] ### Using 'conf' configuration [20211108_11:33:08] ### Trying 'fdt' fdt subimage [20211108_11:33:08] ### Description: unavailable [20211108_11:33:08] ### Type: Flat Device Tree [20211108_11:33:08] ### Compression: uncompressed [20211108_11:33:08] ### Data Start: 0x7a200800 [20211108_11:33:08] ### Data Size: 124008 Bytes = 121.1 KiB [20211108_11:33:08] ### Architecture: AArch64 [20211108_11:33:08] ### Load Address: 0x0a100000 [20211108_11:33:08] ### Hash algo: sha256 [20211108_11:33:08] ### Hash value: 38e55c5bea8e1a37f07d62cdfa515f794841f8aae29b93196095e607a12377af [20211108_11:33:08] ### Verifying Hash Integrity ... sha256+ OK [20211108_11:33:08] ### Loading fdt from 0x0a100000 to 0x0a100000 [20211108_11:33:08] ### Booting using the fdt blob at 0x0a100000 [20211108_11:33:08] ### Loading Kernel Image from 0x7a21ee00 to 0x00280000 ... OK [20211108_11:33:08] ### 'reserved-memory' ramoops@110000: addr=110000 size=f0000 [20211108_11:33:08] ### Using Device Tree in place at 000000000a100000, end 000000000a121467 [20211108_11:33:08] ### vp0, plane_mask:0x3f, primary-id:4, curser-id:-1 [20211108_11:33:08] ### vp1, plane_mask:0x0, primary-id:0, curser-id:-1 [20211108_11:33:08] ### vp2, plane_mask:0x0, primary-id:0, curser-id:-1 [20211108_11:33:08] ### Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) [20211108_11:33:08] ### Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000) [20211108_11:33:08] ### Total: 1020.162 ms [20211108_11:33:08] ### [20211108_11:33:08] ### Starting kernel ... [20211108_11:33:08] ### [20211108_11:33:08] ### [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [20211108_11:33:08] ### [ 0.000000] Linux version 4.19.193 (root@Ubuntu18.04.2-Devel) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05), GNU ld (Linaro_Binutils-2017.05) 2.27.0.20161019) #2 SMP Wed Nov 3 15:16:24 CST 2021 [20211108_11:33:08] ### [ 0.000000] Machine model: BananaPi RK3568-BPI-R2PRO-PC HDMI (Linux) [20211108_11:33:08] ### [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '') [20211108_11:33:08] ### [ 0.000000] bootconsole [uart8250] enabled [20211108_11:33:08] ### [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB [20211108_11:33:08] ### [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 [20211108_11:33:08] ### [ 0.000000] psci: probing for conduit method from DT. [20211108_11:33:08] ### [ 0.000000] psci: PSCIv1.1 detected in firmware. [20211108_11:33:08] ### [ 0.000000] psci: Using standard PSCI v0.2 function IDs [20211108_11:33:08] ### [ 0.000000] psci: Trusted OS migration not required [20211108_11:33:08] ### [ 0.000000] psci: SMC Calling Convention v1.2 [20211108_11:33:08] ### [ 0.000000] percpu: Embedded 23 pages/cpu s54184 r8192 d31832 u94208 [20211108_11:33:08] ### [ 0.000000] Detected VIPT I-cache on CPU0 [20211108_11:33:08] ### [ 0.000000] CPU features: detected: Virtualization Host Extensions [20211108_11:33:08] ### [ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [20211108_11:33:08] ### [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511496 [20211108_11:33:08] ### [ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 [20211108_11:33:08] ### [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [20211108_11:33:08] ### [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [20211108_11:33:08] ### [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [20211108_11:33:08] ### [ 0.000000] Memory: 1998432K/2078720K available (13886K kernel code, 1954K rwdata, 4892K rodata, 1600K init, 1807K bss, 63904K reserved, 16384K cma-reserved) [20211108_11:33:08] ### [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [20211108_11:33:08] ### [ 0.000000] ftrace: allocating 51709 entries in 202 pages [20211108_11:33:08] ### [ 0.000000] rcu: Hierarchical RCU implementation. [20211108_11:33:08] ### [ 0.000000] rcu: RCU event tracing is enabled. [20211108_11:33:08] ### [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [20211108_11:33:08] ### [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [20211108_11:33:08] ### [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [20211108_11:33:08] ### [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [20211108_11:33:08] ### [ 0.000000] GICv3: Distributor has no Range Selector support [20211108_11:33:08] ### [ 0.000000] GICv3: no VLPI support, no direct LPI support [20211108_11:33:08] ### [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff] [20211108_11:33:08] ### [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @7e4f0000 (indirect, esz 8, psz 64K, shr 0) [20211108_11:33:08] ### [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @7e500000 (flat, esz 2, psz 64K, shr 0) [20211108_11:33:08] ### [ 0.000000] ITS: using cache flushing for cmd queue [20211108_11:33:08] ### [ 0.000000] GIC: using LPI property table @0x000000007e510000 [20211108_11:33:08] ### [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [20211108_11:33:08] ### [ 0.000000] CPU0: using LPI pending table @0x000000007e520000 [20211108_11:33:08] ### [ 0.000000] GIC: using cache flushing for LPI property table [20211108_11:33:08] ### [ 0.000000] random: random: get_random_bytes called from start_kernel+0x36c/0x510 with crng_init=0 [20211108_11:33:08] ### [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [20211108_11:33:08] ### [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [20211108_11:33:08] ### [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [20211108_11:33:08] ### [ 0.002203] Console: colour dummy device 80x25 [20211108_11:33:08] ### [ 0.002661] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [20211108_11:33:08] ### [ 0.003620] pid_max: default: 32768 minimum: 301 [20211108_11:33:08] ### [ 0.004228] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [20211108_11:33:08] ### [ 0.004867] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [20211108_11:33:08] ### [ 0.007314] ASID allocator initialised with 32768 entries [20211108_11:33:08] ### [ 0.007990] rcu: Hierarchical SRCU implementation. [20211108_11:33:08] ### [ 0.011315] Platform MSI: interrupt-controller@fd440000 domain created [20211108_11:33:08] ### [ 0.012481] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [20211108_11:33:08] ### [ 0.014067] smp: Bringing up secondary CPUs ... [20211108_11:33:08] ### [ 0.015298] Detected VIPT I-cache on CPU1 [20211108_11:33:08] ### [ 0.015340] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [20211108_11:33:08] ### [ 0.015392] CPU1: using LPI pending table @0x000000007e6b0000 [20211108_11:33:08] ### [ 0.015450] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [20211108_11:33:08] ### [ 0.016461] Detected VIPT I-cache on CPU2 [20211108_11:33:08] ### [ 0.016497] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [20211108_11:33:08] ### [ 0.016551] CPU2: using LPI pending table @0x000000007e700000 [20211108_11:33:08] ### [ 0.016597] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [20211108_11:33:08] ### [ 0.017470] Detected VIPT I-cache on CPU3 [20211108_11:33:08] ### [ 0.017504] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [20211108_11:33:08] ### [ 0.017560] CPU3: using LPI pending table @0x000000007e720000 [20211108_11:33:08] ### [ 0.017602] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [20211108_11:33:08] ### [ 0.017737] smp: Brought up 1 node, 4 CPUs [20211108_11:33:08] ### [ 0.024673] SMP: Total of 4 processors activated. [20211108_11:33:08] ### [ 0.025118] CPU features: detected: GIC system register CPU interface [20211108_11:33:08] ### [ 0.025719] CPU features: detected: Privileged Access Never [20211108_11:33:08] ### [ 0.026240] CPU features: detected: LSE atomic instructions [20211108_11:33:08] ### [ 0.026781] CPU features: detected: User Access Override [20211108_11:33:08] ### [ 0.027281] CPU features: detected: 32-bit EL0 Support [20211108_11:33:08] ### [ 0.027763] CPU features: detected: RAS Extension Support [20211108_11:33:08] ### [ 0.028454] CPU: All CPU(s) started at EL2 [20211108_11:33:08] ### [ 0.028869] alternatives: patching kernel code [20211108_11:33:08] ### [ 0.036110] devtmpfs: initialized [20211108_11:33:08] ### [ 0.062429] Registered cp15_barrier emulation handler [20211108_11:33:08] ### [ 0.062921] Registered setend emulation handler [20211108_11:33:08] ### [ 0.063609] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [20211108_11:33:08] ### [ 0.064533] futex hash table entries: 1024 (order: 4, 65536 bytes) [20211108_11:33:08] ### [ 0.065933] pinctrl core: initialized pinctrl subsystem [20211108_11:33:08] ### [ 0.067572] NET: Registered protocol family 16 [20211108_11:33:08] ### [ 0.072435] cpuidle: using governor menu [20211108_11:33:08] ### [ 0.072841] Registered FIQ tty driver [20211108_11:33:08] ### [ 0.073712] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [20211108_11:33:08] ### [ 0.076165] DMA: preallocated 256 KiB pool for atomic allocations [20211108_11:33:08] ### [ 0.081665] console [pstore-1] enabled [20211108_11:33:08] ### [ 0.082024] pstore: Registered ramoops as persistent store backend [20211108_11:33:08] ### [ 0.082643] ramoops: attached 0xf0000@0x110000, ecc: 0/0 [20211108_11:33:09] ### [ 0.123191] rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio) [20211108_11:33:09] ### [ 0.124512] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio) [20211108_11:33:09] ### [ 0.125804] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio) [20211108_11:33:09] ### [ 0.127111] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio) [20211108_11:33:09] ### [ 0.128386] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio) [20211108_11:33:09] ### [ 0.129100] rockchip-pinctrl pinctrl: probed pinctrl [20211108_11:33:09] ### [ 0.144693] cryptd: max_cpu_qlen set to 1000 [20211108_11:33:09] ### [[ 0.146943] console [ttyFIQ0] enabled [20211108_11:33:09] ### 0.146943] console [ttyFIQ0] enabled [20211108_11:33:09] ### [ 0.147629] bootconsole [uart8250] disabled [20211108_11:33:09] ### [ 0.147629] bootconsole [uart8250] disabled [20211108_11:33:09] ### [ 0.148283] Registered fiq debugger ttyFIQ0 [20211108_11:33:09] ### [ 0.149540] vcc3v3_sys: supplied by dc_12v [20211108_11:33:09] ### [ 0.150001] vcc5v0_sys: supplied by dc_12v [20211108_11:33:09] ### [ 0.151673] vcc2v5-sys: supplied by vcc3v3_sys [20211108_11:33:09] ### [ 0.152180] pcie30_avdd0v9: supplied by vcc3v3_sys [20211108_11:33:09] ### [ 0.152651] pcie30_avdd1v8: supplied by vcc3v3_sys [20211108_11:33:09] ### [ 0.153123] vcc3v3_bu: supplied by vcc5v0_sys [20211108_11:33:09] ### [ 0.153643] vcc3v3_minipcie: supplied by vcc3v3_sys [20211108_11:33:09] ### [ 0.154130] vcc3v3_ngff: supplied by vcc3v3_sys [20211108_11:33:09] ### [ 0.155847] rk_iommu fde4b000.iommu: version = 2 [20211108_11:33:09] ### [ 0.156511] rk_iommu fdea0800.iommu: version = 2 [20211108_11:33:09] ### [ 0.157001] rk_iommu fded0480.iommu: version = 2 [20211108_11:33:09] ### [ 0.157558] rk_iommu fdee0800.iommu: version = 2 [20211108_11:33:09] ### [ 0.158049] rk_iommu fdef0800.iommu: version = 2 [20211108_11:33:09] ### [ 0.158501] rk_iommu fdf40f00.iommu: version = 2 [20211108_11:33:09] ### [ 0.159105] rk_iommu fdf80800.iommu: version = 2 [20211108_11:33:09] ### [ 0.159587] rk_iommu fdff1a00.iommu: version = 2 [20211108_11:33:09] ### [ 0.160052] rk_iommu fe043e00.iommu: version = 2 [20211108_11:33:09] ### [ 0.161098] SCSI subsystem initialized [20211108_11:33:09] ### [ 0.161429] usbcore: registered new interface driver usbfs [20211108_11:33:09] ### [ 0.161527] usbcore: registered new interface driver hub [20211108_11:33:09] ### [ 0.161603] usbcore: registered new device driver usb [20211108_11:33:09] ### [ 0.161737] media: Linux media interface: v0.10 [20211108_11:33:09] ### [ 0.161807] videodev: Linux video capture interface: v2.00 [20211108_11:33:09] ### [ 0.161931] pps_core: LinuxPPS API ver. 1 registered [20211108_11:33:09] ### [ 0.161956] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [20211108_11:33:09] ### [ 0.161998] PTP clock support registered [20211108_11:33:09] ### [ 0.162444] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [20211108_11:33:09] ### [ 0.165499] Advanced Linux Sound Architecture Driver Initialized. [20211108_11:33:09] ### [ 0.166100] Bluetooth: Core ver 2.22 [20211108_11:33:09] ### [ 0.166169] NET: Registered protocol family 31 [20211108_11:33:09] ### [ 0.166194] Bluetooth: HCI device and connection manager initialized [20211108_11:33:09] ### [ 0.166225] Bluetooth: HCI socket layer initialized [20211108_11:33:09] ### [ 0.166253] Bluetooth: L2CAP socket layer initialized [20211108_11:33:09] ### [ 0.166309] Bluetooth: SCO socket layer initialized [20211108_11:33:09] ### [ 0.166862] rockchip-cpuinfo cpuinfo: SoC : 35682000 [20211108_11:33:09] ### [ 0.166893] rockchip-cpuinfo cpuinfo: Serial : 5f1f4fee3938fb05 [20211108_11:33:09] ### [ 0.167975] clocksource: Switched to clocksource arch_sys_counter [20211108_11:33:09] ### [ 0.266856] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [20211108_11:33:09] ### [ 0.267257] NET: Registered protocol family 2 [20211108_11:33:09] ### [ 0.268096] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes) [20211108_11:33:09] ### [ 0.268178] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [20211108_11:33:09] ### [ 0.268353] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) [20211108_11:33:09] ### [ 0.268854] TCP: Hash tables configured (established 16384 bind 16384) [20211108_11:33:09] ### [ 0.269060] UDP hash table entries: 1024 (order: 4, 98304 bytes) [20211108_11:33:09] ### [ 0.269190] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) [20211108_11:33:09] ### [ 0.269540] NET: Registered protocol family 1 [20211108_11:33:09] ### [ 0.270420] RPC: Registered named UNIX socket transport module. [20211108_11:33:09] ### [ 0.270448] RPC: Registered udp transport module. [20211108_11:33:09] ### [ 0.270469] RPC: Registered tcp transport module. [20211108_11:33:09] ### [ 0.270489] RPC: Registered tcp NFSv4.1 backchannel transport module. [20211108_11:33:09] ### [ 0.273653] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [20211108_11:33:09] ### [ 0.276331] Initialise system trusted keyrings [20211108_11:33:09] ### [ 0.276571] workingset: timestamp_bits=61 max_order=19 bucket_order=0 [20211108_11:33:09] ### [ 0.285083] squashfs: version 4.0 (2009/01/31) Phillip Lougher [20211108_11:33:09] ### [ 0.286116] NFS: Registering the id_resolver key type [20211108_11:33:09] ### [ 0.286173] Key type id_resolver registered [20211108_11:33:09] ### [ 0.286187] Key type id_legacy registered [20211108_11:33:09] ### [ 0.286238] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [20211108_11:33:09] ### [ 0.286515] fuse init (API version 7.27) [20211108_11:33:09] ### [ 0.287106] SGI XFS with security attributes, no debug enabled [20211108_11:33:09] ### [ 0.290625] NET: Registered protocol family 38 [20211108_11:33:09] ### [ 0.290679] Key type asymmetric registered [20211108_11:33:09] ### [ 0.290695] Asymmetric key parser 'x509' registered [20211108_11:33:09] ### [ 0.290757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [20211108_11:33:09] ### [ 0.290784] io scheduler noop registered [20211108_11:33:09] ### [ 0.290806] io scheduler deadline registered [20211108_11:33:09] ### [ 0.290977] io scheduler cfq registered (default) [20211108_11:33:09] ### [ 0.291005] io scheduler mq-deadline registered [20211108_11:33:09] ### [ 0.291027] io scheduler kyber registered [20211108_11:33:09] ### [ 0.292425] rockchip-csi2-dphy csi2-dphy0: bad remote port parent [20211108_11:33:09] ### [ 0.292617] rockchip-csi2-dphy-hw fe870000.csi2-dphy-hw: csi2 dphy hw probe successfully! [20211108_11:33:09] ### [ 0.295721] phy phy-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.4 [20211108_11:33:09] ### [ 0.296050] phy phy-fe8a0000.usb2-phy.1: No vbus specified for otg port [20211108_11:33:09] ### [ 0.297848] extcon extcon1: failed to create extcon usb2-phy link [20211108_11:33:09] ### [ 0.298062] phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.4 [20211108_11:33:09] ### [ 0.298300] phy phy-fe8b0000.usb2-phy.3: Linked as a consumer to regulator.4 [20211108_11:33:09] ### [ 0.298470] phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port [20211108_11:33:09] ### [ 0.308294] rk-pcie 3c0400000.pcie: Linked as a consumer to regulator.13 [20211108_11:33:09] ### [ 0.308628] rk-pcie 3c0800000.pcie: Linked as a consumer to regulator.13 [20211108_11:33:09] ### [ 0.309362] mpp_service mpp-srv: 742100cf4 author: zuowei8 2021-10-21 upload kernel code [20211108_11:33:09] ### [ 0.309383] mpp_service mpp-srv: probe start [20211108_11:33:09] ### [ 0.310697] iommu: Adding device fdf40000.rkvenc to group 5 [20211108_11:33:09] ### [ 0.310751] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to fdf40f00.iommu [20211108_11:33:09] ### [ 0.311016] mpp_rkvenc fdf40000.rkvenc: probing start [20211108_11:33:09] ### [ 0.311728] mpp_rkvenc fdf40000.rkvenc: venc regulator not ready, retry [20211108_11:33:09] ### [ 0.311749] rkvenc_init:1196: failed to add venc devfreq [20211108_11:33:09] ### [ 0.313703] iommu: Adding device fdea0400.vdpu to group 1 [20211108_11:33:09] ### [ 0.313760] mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu [20211108_11:33:09] ### [ 0.313980] mpp_vdpu2 fdea0400.vdpu: probe device [20211108_11:33:09] ### [ 0.314795] mpp_vdpu2 fdea0400.vdpu: probing finish [20211108_11:33:09] ### [ 0.315522] iommu: Adding device fdee0000.vepu to group 3 [20211108_11:33:09] ### [ 0.315575] mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu [20211108_11:33:09] ### [ 0.315831] mpp_vepu2 fdee0000.vepu: probe device [20211108_11:33:09] ### [ 0.316551] mpp_vepu2 fdee0000.vepu: probing finish [20211108_11:33:09] ### [ 0.317246] iommu: Adding device fdef0000.iep to group 4 [20211108_11:33:09] ### [ 0.317296] mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu [20211108_11:33:09] ### [ 0.317503] mpp-iep2 fdef0000.iep: probe device [20211108_11:33:09] ### [ 0.318199] mpp-iep2 fdef0000.iep: allocate roi buffer failed [20211108_11:33:09] ### [ 0.318456] mpp-iep2 fdef0000.iep: probing finish [20211108_11:33:09] ### [ 0.319163] iommu: Adding device fded0000.jpegd to group 2 [20211108_11:33:09] ### [ 0.319218] mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu [20211108_11:33:09] ### [ 0.319422] mpp_jpgdec fded0000.jpegd: probe device [20211108_11:33:09] ### [ 0.320116] mpp_jpgdec fded0000.jpegd: probing finish [20211108_11:33:09] ### [ 0.320622] rk-pcie 3c0400000.pcie: missing legacy IRQ resource [20211108_11:33:09] ### [ 0.320655] rk-pcie 3c0400000.pcie: Missing *config* reg space [20211108_11:33:09] ### [ 0.320679] rk-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges: [20211108_11:33:09] ### [ 0.320745] rk-pcie 3c0400000.pcie: err 0x340000000..0x3407fffff -> 0x40000000 [20211108_11:33:09] ### [ 0.320757] rk-pcie 3c0800000.pcie: missing legacy IRQ resource [20211108_11:33:09] ### [ 0.320782] rk-pcie 3c0400000.pcie: IO 0x340800000..0x3408fffff -> 0x40800000 [20211108_11:33:09] ### [ 0.320802] rk-pcie 3c0800000.pcie: Missing *config* reg space [20211108_11:33:09] ### [ 0.320830] rk-pcie 3c0400000.pcie: MEM 0x340900000..0x37fffffff -> 0x40900000 [20211108_11:33:09] ### [ 0.320840] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges: [20211108_11:33:09] ### [ 0.320845] iommu: Adding device fdf80200.rkvdec to group 6 [20211108_11:33:09] ### [ 0.320875] mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu [20211108_11:33:09] ### [ 0.320907] rk-pcie 3c0800000.pcie: err 0x380000000..0x3807fffff -> 0x80000000 [20211108_11:33:09] ### [ 0.320936] rk-pcie 3c0800000.pcie: IO 0x380800000..0x3808fffff -> 0x80800000 [20211108_11:33:09] ### [ 0.320970] rk-pcie 3c0800000.pcie: MEM 0x380900000..0x3bfffffff -> 0x80900000 [20211108_11:33:09] ### [ 0.321206] mpp_rkvdec2 fdf80200.rkvdec: probing start [20211108_11:33:09] ### [ 0.321943] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found! [20211108_11:33:09] ### [ 0.321962] rkvdec2_init:875: No niu aclk reset resource define [20211108_11:33:09] ### [ 0.321994] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found! [20211108_11:33:09] ### [ 0.322016] rkvdec2_init:878: No niu hclk reset resource define [20211108_11:33:09] ### [ 0.322458] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000 [20211108_11:33:09] ### [ 0.322492] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000 [20211108_11:33:09] ### [ 0.322515] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056 [20211108_11:33:09] ### [ 0.322535] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536 [20211108_11:33:09] ### [ 0.322559] mpp_rkvdec2 fdf80200.rkvdec: min_width 512 [20211108_11:33:09] ### [ 0.322605] mpp_rkvdec2 fdf80200.rkvdec: probing finish [20211108_11:33:09] ### [ 0.323081] mpp_service mpp-srv: probe success [20211108_11:33:09] ### [ 0.330777] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330 [20211108_11:33:09] ### [ 0.330822] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [20211108_11:33:09] ### [ 0.333988] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330 [20211108_11:33:09] ### [ 0.334026] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [20211108_11:33:09] ### [ 0.336606] rockchip-system-monitor rockchip-system-monitor: system monitor probe [20211108_11:33:09] ### [ 0.337920] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [20211108_11:33:09] ### [ 0.339056] fe670000.serial: ttyS3 at MMIO 0xfe670000 (irq = 70, base_baud = 1500000) is a 16550A [20211108_11:33:09] ### [ 0.339918] fe680000.serial: ttyS4 at MMIO 0xfe680000 (irq = 71, base_baud = 1500000) is a 16550A [20211108_11:33:09] ### [ 0.343454] random: fast init done [20211108_11:33:09] ### [ 0.343806] random: crng init done [20211108_11:33:09] ### [ 0.344796] iommu: Adding device fe040000.vop to group 8 [20211108_11:33:09] ### [ 0.344856] rockchip-vop2 fe040000.vop: Linked as a consumer to fe043e00.iommu [20211108_11:33:09] ### [ 0.351599] rockchip-drm display-subsystem: Linked as a consumer to fe040000.vop [20211108_11:33:09] ### [ 0.353299] rockchip-drm display-subsystem: Linked as a consumer to fe0a0000.hdmi [20211108_11:33:09] ### [ 0.355967] rockchip-drm display-subsystem: dmc is disabled [20211108_11:33:09] ### [ 0.356335] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x3f, primary plane phy id: 4 [20211108_11:33:09] ### [ 0.356376] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x0, primary plane phy id: -1 [20211108_11:33:09] ### [ 0.356408] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1 [20211108_11:33:09] ### [ 0.356683] [drm] unsupported AFBC format[3432564e] [20211108_11:33:09] ### [ 0.356766] [drm] failed to init overlay plane Cluster0-win1 [20211108_11:33:09] ### [ 0.356848] [drm] failed to init overlay plane Cluster1-win1 [20211108_11:33:09] ### [ 0.356999] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008eee8d8) [20211108_11:33:09] ### [ 0.357265] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [20211108_11:33:09] ### [ 0.358019] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [20211108_11:33:09] ### [ 0.358810] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffff8008ef23e0) [20211108_11:33:09] ### [ 0.358833] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [20211108_11:33:09] ### [ 0.358845] [drm] No driver support for vblank timestamp query. [20211108_11:33:09] ### [ 0.614360] rockchip-drm display-subsystem: fb0: frame buffer device [20211108_11:33:09] ### [ 0.615573] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0 [20211108_11:33:09] ### [ 0.622811] mali fde60000.gpu: Kernel DDK version g2p0-01eac0 [20211108_11:33:09] ### [ 0.622952] mali fde60000.gpu: Power management initialization failed error = -517 [20211108_11:33:09] ### [ 0.622995] mali fde60000.gpu: Device initialization Deferred [20211108_11:33:09] ### [ 0.623562] cacheinfo: Unable to detect cache hierarchy for CPU 0 [20211108_11:33:09] ### [ 0.624479] brd: module loaded [20211108_11:33:09] ### [ 0.633882] loop: module loaded [20211108_11:33:09] ### [ 0.634575] zram: Added device: zram0 [20211108_11:33:09] ### [ 0.634803] lkdtm: No crash points registered, enable through debugfs [20211108_11:33:09] ### [ 0.636597] ahci fc800000.sata: forcing port_map 0x0 -> 0x1 [20211108_11:33:09] ### [ 0.636679] ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [20211108_11:33:09] ### [ 0.636712] ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst [20211108_11:33:09] ### [ 0.636748] ahci fc800000.sata: port 0 is not capable of FBS [20211108_11:33:09] ### [ 0.638164] scsi host0: ahci [20211108_11:33:09] ### [ 0.638677] ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 11 [20211108_11:33:09] ### [ 0.641080] libphy: Fixed MDIO Bus: probed [20211108_11:33:09] ### [ 0.641678] CAN device driver interface [20211108_11:33:09] ### [ 0.644698] rk_gmac-dwmac fe010000.ethernet: no regulator found [20211108_11:33:09] ### [ 0.644736] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output). [20211108_11:33:09] ### [ 0.644754] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f). [20211108_11:33:09] ### [ 0.644768] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26). [20211108_11:33:09] ### [ 0.644790] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [20211108_11:33:09] ### [ 0.649882] rk_gmac-dwmac fe010000.ethernet: init for RGMII [20211108_11:33:09] ### [ 0.650136] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [20211108_11:33:09] ### [ 0.650167] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [20211108_11:33:09] ### [ 0.650186] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [20211108_11:33:09] ### [ 0.650208] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [20211108_11:33:09] ### [ 0.650231] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [20211108_11:33:09] ### [ 0.650251] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [20211108_11:33:09] ### [ 0.650307] rk_gmac-dwmac fe010000.ethernet: TSO supported [20211108_11:33:09] ### [ 0.650331] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [20211108_11:33:09] ### [ 0.650356] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [20211108_11:33:09] ### [ 0.781344] libphy: stmmac: probed [20211108_11:33:09] ### [ 0.783031] rk_gmac-dwmac fe2a0000.ethernet: no regulator found [20211108_11:33:09] ### [ 0.783068] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (input). [20211108_11:33:09] ### [ 0.783087] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c). [20211108_11:33:09] ### [ 0.783102] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f). [20211108_11:33:09] ### [ 0.783121] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no). [20211108_11:33:09] ### [ 0.783205] rk_gmac-dwmac fe2a0000.ethernet: clock input from PHY [20211108_11:33:09] ### [ 0.788243] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII [20211108_11:33:09] ### [ 0.788577] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [20211108_11:33:09] ### [ 0.788609] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5 [20211108_11:33:09] ### [ 0.788636] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported [20211108_11:33:09] ### [ 0.788659] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported [20211108_11:33:09] ### [ 0.788680] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported [20211108_11:33:09] ### [ 0.788700] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported [20211108_11:33:09] ### [ 0.788755] rk_gmac-dwmac fe2a0000.ethernet: TSO supported [20211108_11:33:09] ### [ 0.788780] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [20211108_11:33:09] ### [ 0.788798] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled [20211108_11:33:09] ### [ 0.921346] libphy: stmmac: probed [20211108_11:33:09] ### [ 0.924471] usbcore: registered new interface driver rndis_wlan [20211108_11:33:09] ### [ 0.924566] usbcore: registered new interface driver rtl8150 [20211108_11:33:09] ### [ 0.924715] usbcore: registered new interface driver r8152 [20211108_11:33:09] ### [ 0.924796] usbcore: registered new interface driver asix [20211108_11:33:09] ### [ 0.924873] usbcore: registered new interface driver ax88179_178a [20211108_11:33:09] ### [ 0.924947] usbcore: registered new interface driver cdc_ether [20211108_11:33:09] ### [ 0.925027] usbcore: registered new interface driver rndis_host [20211108_11:33:09] ### [ 0.925105] usbcore: registered new interface driver cdc_ncm [20211108_11:33:09] ### [ 0.925179] usbcore: registered new interface driver qmi_wwan [20211108_11:33:09] ### [ 0.925252] usbcore: registered new interface driver cdc_mbim [20211108_11:33:09] ### [ 0.926899] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2 [20211108_11:33:09] ### [ 0.930803] dwc3 fd000000.dwc3: Failed to get clk 'ref': -2 [20211108_11:33:09] ### [ 0.936133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [20211108_11:33:09] ### [ 0.936182] ehci-pci: EHCI PCI platform driver [20211108_11:33:09] ### [ 0.936287] ehci-platform: EHCI generic platform driver [20211108_11:33:09] ### [ 0.938639] ehci-platform fd800000.usb: EHCI Host Controller [20211108_11:33:09] ### [ 0.938955] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [20211108_11:33:09] ### [ 0.939430] ehci-platform fd800000.usb: irq 12, io mem 0xfd800000 [20211108_11:33:09] ### [ 0.951334] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [20211108_11:33:09] ### [ 0.951354] ata1: SATA link down (SStatus 0 SControl 300) [20211108_11:33:09] ### [ 0.951690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [20211108_11:33:09] ### [ 0.951722] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 0.951745] usb usb1: Product: EHCI Host Controller [20211108_11:33:09] ### [ 0.951768] usb usb1: Manufacturer: Linux 4.19.193 ehci_hcd [20211108_11:33:09] ### [ 0.951790] usb usb1: SerialNumber: fd800000.usb [20211108_11:33:09] ### [ 0.952487] hub 1-0:1.0: USB hub found [20211108_11:33:09] ### [ 0.952569] hub 1-0:1.0: 1 port detected [20211108_11:33:09] ### [ 0.955385] ehci-platform fd880000.usb: EHCI Host Controller [20211108_11:33:09] ### [ 0.955642] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 [20211108_11:33:09] ### [ 0.956214] ehci-platform fd880000.usb: irq 14, io mem 0xfd880000 [20211108_11:33:09] ### [ 0.968023] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [20211108_11:33:09] ### [ 0.968337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [20211108_11:33:09] ### [ 0.968377] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 0.968402] usb usb2: Product: EHCI Host Controller [20211108_11:33:09] ### [ 0.968425] usb usb2: Manufacturer: Linux 4.19.193 ehci_hcd [20211108_11:33:09] ### [ 0.968446] usb usb2: SerialNumber: fd880000.usb [20211108_11:33:09] ### [ 0.969052] hub 2-0:1.0: USB hub found [20211108_11:33:09] ### [ 0.969126] hub 2-0:1.0: 1 port detected [20211108_11:33:09] ### [ 0.970177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [20211108_11:33:09] ### [ 0.970223] ohci-platform: OHCI generic platform driver [20211108_11:33:09] ### [ 0.970555] ohci-platform fd840000.usb: Generic Platform OHCI controller [20211108_11:33:09] ### [ 0.970845] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 [20211108_11:33:09] ### [ 0.971233] ohci-platform fd840000.usb: irq 13, io mem 0xfd840000 [20211108_11:33:09] ### [ 1.028941] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [20211108_11:33:09] ### [ 1.028974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 1.028990] usb usb3: Product: Generic Platform OHCI controller [20211108_11:33:09] ### [ 1.029004] usb usb3: Manufacturer: Linux 4.19.193 ohci_hcd [20211108_11:33:09] ### [ 1.029017] usb usb3: SerialNumber: fd840000.usb [20211108_11:33:09] ### [ 1.029663] hub 3-0:1.0: USB hub found [20211108_11:33:09] ### [ 1.029738] hub 3-0:1.0: 1 port detected [20211108_11:33:09] ### [ 1.030468] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [20211108_11:33:09] ### [ 1.030723] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [20211108_11:33:09] ### [ 1.031038] ohci-platform fd8c0000.usb: irq 15, io mem 0xfd8c0000 [20211108_11:33:09] ### [ 1.088931] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [20211108_11:33:09] ### [ 1.088963] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 1.088979] usb usb4: Product: Generic Platform OHCI controller [20211108_11:33:09] ### [ 1.088993] usb usb4: Manufacturer: Linux 4.19.193 ohci_hcd [20211108_11:33:09] ### [ 1.089006] usb usb4: SerialNumber: fd8c0000.usb [20211108_11:33:09] ### [ 1.089633] hub 4-0:1.0: USB hub found [20211108_11:33:09] ### [ 1.089712] hub 4-0:1.0: 1 port detected [20211108_11:33:09] ### [ 1.091924] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [20211108_11:33:09] ### [ 1.092223] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5 [20211108_11:33:09] ### [ 1.092941] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010 [20211108_11:33:09] ### [ 1.093036] xhci-hcd xhci-hcd.4.auto: irq 84, io mem 0xfcc00000 [20211108_11:33:09] ### [ 1.093514] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [20211108_11:33:09] ### [ 1.093546] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 1.093569] usb usb5: Product: xHCI Host Controller [20211108_11:33:09] ### [ 1.093591] usb usb5: Manufacturer: Linux 4.19.193 xhci-hcd [20211108_11:33:09] ### [ 1.093611] usb usb5: SerialNumber: xhci-hcd.4.auto [20211108_11:33:09] ### [ 1.094258] hub 5-0:1.0: USB hub found [20211108_11:33:09] ### [ 1.094333] hub 5-0:1.0: 1 port detected [20211108_11:33:09] ### [ 1.094881] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [20211108_11:33:09] ### [ 1.095124] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6 [20211108_11:33:09] ### [ 1.095165] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed [20211108_11:33:09] ### [ 1.095283] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [20211108_11:33:09] ### [ 1.095505] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [20211108_11:33:09] ### [ 1.095534] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 1.095558] usb usb6: Product: xHCI Host Controller [20211108_11:33:09] ### [ 1.095580] usb usb6: Manufacturer: Linux 4.19.193 xhci-hcd [20211108_11:33:09] ### [ 1.095600] usb usb6: SerialNumber: xhci-hcd.4.auto [20211108_11:33:09] ### [ 1.096207] hub 6-0:1.0: USB hub found [20211108_11:33:09] ### [ 1.096286] hub 6-0:1.0: 1 port detected [20211108_11:33:09] ### [ 1.096992] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [20211108_11:33:09] ### [ 1.097242] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7 [20211108_11:33:09] ### [ 1.098326] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010 [20211108_11:33:09] ### [ 1.098433] xhci-hcd xhci-hcd.5.auto: irq 85, io mem 0xfd000000 [20211108_11:33:09] ### [ 1.098925] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [20211108_11:33:09] ### [ 1.098957] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 1.098982] usb usb7: Product: xHCI Host Controller [20211108_11:33:09] ### [ 1.098996] usb usb7: Manufacturer: Linux 4.19.193 xhci-hcd [20211108_11:33:09] ### [ 1.099009] usb usb7: SerialNumber: xhci-hcd.5.auto [20211108_11:33:09] ### [ 1.099658] hub 7-0:1.0: USB hub found [20211108_11:33:09] ### [ 1.099734] hub 7-0:1.0: 1 port detected [20211108_11:33:09] ### [ 1.100235] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [20211108_11:33:09] ### [ 1.100472] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8 [20211108_11:33:09] ### [ 1.100514] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed [20211108_11:33:09] ### [ 1.100662] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [20211108_11:33:09] ### [ 1.100912] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [20211108_11:33:09] ### [ 1.100943] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [20211108_11:33:09] ### [ 1.100969] usb usb8: Product: xHCI Host Controller [20211108_11:33:09] ### [ 1.100991] usb usb8: Manufacturer: Linux 4.19.193 xhci-hcd [20211108_11:33:09] ### [ 1.101013] usb usb8: SerialNumber: xhci-hcd.5.auto [20211108_11:33:09] ### [ 1.101664] hub 8-0:1.0: USB hub found [20211108_11:33:09] ### [ 1.101743] hub 8-0:1.0: 1 port detected [20211108_11:33:09] ### [ 1.102455] usbcore: registered new interface driver cdc_acm [20211108_11:33:09] ### [ 1.102483] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [20211108_11:33:09] ### [ 1.102583] usbcore: registered new interface driver cdc_wdm [20211108_11:33:09] ### [ 1.102936] usbcore: registered new interface driver uas [20211108_11:33:09] ### [ 1.103197] usbcore: registered new interface driver usb-storage [20211108_11:33:09] ### [ 1.103361] usbcore: registered new interface driver usbserial_generic [20211108_11:33:10] ### [ 1.103421] usbserial: USB Serial support registered for generic [20211108_11:33:10] ### [ 1.103516] usbcore: registered new interface driver cp210x [20211108_11:33:10] ### [ 1.103568] usbserial: USB Serial support registered for cp210x [20211108_11:33:10] ### [ 1.103733] usbcore: registered new interface driver ftdi_sio [20211108_11:33:10] ### [ 1.103786] usbserial: USB Serial support registered for FTDI USB Serial Device [20211108_11:33:10] ### [ 1.104228] usbcore: registered new interface driver keyspan [20211108_11:33:10] ### [ 1.104284] usbserial: USB Serial support registered for Keyspan - (without firmware) [20211108_11:33:10] ### [ 1.104335] usbserial: USB Serial support registered for Keyspan 1 port adapter [20211108_11:33:10] ### [ 1.104379] usbserial: USB Serial support registered for Keyspan 2 port adapter [20211108_11:33:10] ### [ 1.104436] usbserial: USB Serial support registered for Keyspan 4 port adapter [20211108_11:33:10] ### [ 1.104542] usbcore: registered new interface driver option [20211108_11:33:10] ### [ 1.104596] usbserial: USB Serial support registered for GSM modem (1-port) [20211108_11:33:10] ### [ 1.105248] usbcore: registered new interface driver oti6858 [20211108_11:33:10] ### [ 1.105306] usbserial: USB Serial support registered for oti6858 [20211108_11:33:10] ### [ 1.105409] usbcore: registered new interface driver pl2303 [20211108_11:33:10] ### [ 1.105451] usbserial: USB Serial support registered for pl2303 [20211108_11:33:10] ### [ 1.105573] usbcore: registered new interface driver qcserial [20211108_11:33:10] ### [ 1.105629] usbserial: USB Serial support registered for Qualcomm USB modem [20211108_11:33:10] ### [ 1.105775] usbcore: registered new interface driver sierra [20211108_11:33:10] ### [ 1.105830] usbserial: USB Serial support registered for Sierra USB modem [20211108_11:33:10] ### [ 1.107926] usbcore: registered new interface driver usbtouchscreen [20211108_11:33:10] ### [ 1.108097] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0 [20211108_11:33:10] ### [ 1.108127] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0 [20211108_11:33:10] ### [ 1.108617] .. rk pwm remotectl v2.0 init [20211108_11:33:10] ### [ 1.108999] input: fe6e0030.pwm as /devices/platform/fe6e0030.pwm/input/input0 [20211108_11:33:10] ### [ 1.109502] remotectl-pwm fe6e0030.pwm: pwm version is 0x2130000 [20211108_11:33:10] ### [ 1.109535] remotectl-pwm fe6e0030.pwm: cannot find PWR IRQ [20211108_11:33:10] ### [ 1.109570] remotectl-pwm fe6e0030.pwm: pwm sip wakeup config error!! [20211108_11:33:10] ### [ 1.109593] remotectl-pwm fe6e0030.pwm: Donot support ATF Wakeup [20211108_11:33:10] ### [ 1.110493] i2c /dev entries driver [20211108_11:33:10] ### [ 1.112164] fan53555-regulator 0-001c: Failed to get chip ID! [20211108_11:33:10] ### [ 1.113765] rk808 0-0020: chip id: 0x8090 [20211108_11:33:10] ### [ 1.113842] rk808 0-0020: No cache defaults, reading back from HW [20211108_11:33:10] ### [ 1.137673] rk808 0-0020: source: on=0x10, off=0x00 [20211108_11:33:10] ### [ 1.137715] rk808 0-0020: support dcdc3 fb mode:-22, 63 [20211108_11:33:10] ### [ 1.137735] rk808 0-0020: support pmic reset mode:0,0 [20211108_11:33:10] ### [ 1.144086] rk808-regulator rk808-regulator: there is no dvs0 gpio [20211108_11:33:10] ### [ 1.144159] rk808-regulator rk808-regulator: there is no dvs1 gpio [20211108_11:33:10] ### [ 1.144957] vdd_logic: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.145833] vdd_gpu: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.146276] vcc_ddr: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.146744] vdd_npu: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.147558] vcc_1v8: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.148051] vdda0v9_image: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.148846] vdda_0v9: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.149284] vdda0v9_pmu: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.149728] vccio_acodec: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.150531] vccio_sd: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.150975] vcc3v3_pmu: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.151784] vcca_1v8: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.152234] vcca1v8_pmu: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.152671] vcca1v8_image: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.153456] vcc_3v3: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.154234] vcc3v3_sd: supplied by vcc3v3_sys [20211108_11:33:10] ### [ 1.154688] rk817-battery rk817-battery: Failed to find matching dt id [20211108_11:33:10] ### [ 1.155026] rk817-charger rk817-charger: Failed to find matching dt id [20211108_11:33:10] ### [ 1.158417] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1 [20211108_11:33:10] ### [ 1.165079] rk808-rtc rk808-rtc: registered as rtc0 [20211108_11:33:10] ### [ 1.166862] rk808-rtc rk808-rtc: setting system clock to 2017-08-04 09:17:26 UTC (1501838246) [20211108_11:33:10] ### [ 1.169894] rtc-hym8563 3-0051: could not init device, -6 [20211108_11:33:10] ### [ 1.171634] gsensor_mc3230 5-004c: sensor_register_device: gs_mc3230, id = 27 [20211108_11:33:10] ### [ 1.171672] i2c i2c-5: sensor_probe: gs_mc3230,000000003195dd44 [20211108_11:33:10] ### [ 1.171742] gsensor_mc3230 5-004c: sensor_chip_init:gs_mc3230:devid=0x0,ops=0x0000000072464290 [20211108_11:33:10] ### [ 1.211515] [Gsensor] init_3230_ctl_data 457 : error: -6 [20211108_11:33:10] ### [ 1.211546] gsensor_mc3230 5-004c: sensor_initial:fail to init sensor [20211108_11:33:10] ### [ 1.211561] gsensor_mc3230 5-004c: sensor_chip_init:fail to init sensor [20211108_11:33:10] ### [ 1.211575] i2c i2c-5: sensor_probe failed -2 [20211108_11:33:10] ### [ 1.211575] [20211108_11:33:10] ### [ 1.214098] iommu: Adding device fdff0000.rkisp to group 7 [20211108_11:33:10] ### [ 1.214157] rkisp_hw fdff0000.rkisp: Linked as a consumer to fdff1a00.iommu [20211108_11:33:10] ### [ 1.214412] rkisp_hw fdff0000.rkisp: is_thunderboot: 0 [20211108_11:33:10] ### [ 1.214433] rkisp_hw fdff0000.rkisp: max input:0x0@0fps [20211108_11:33:10] ### [ 1.214486] rkisp_hw fdff0000.rkisp: can't request region for resource [mem 0xfdff0000-0xfdffffff] [20211108_11:33:10] ### [ 1.215714] rkisp rkisp-vir0: rkisp driver version: v01.06.01 [20211108_11:33:10] ### [ 1.215854] rkisp rkisp-vir0: No memory-region-thunderboot specified [20211108_11:33:10] ### [ 1.216130] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized! [20211108_11:33:10] ### [ 1.216171] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized! [20211108_11:33:10] ### [ 1.218880] usbcore: registered new interface driver uvcvideo [20211108_11:33:10] ### [ 1.218909] USB Video Class driver (1.1.1) [20211108_11:33:10] ### [ 1.219376] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.24 [20211108_11:33:10] ### [ 1.219443] rockchip-iodomain fdc20000.syscon:io-domains: pmuio1(3300000 uV) supplied by vcc3v3_pmu [20211108_11:33:10] ### [ 1.219610] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu [20211108_11:33:10] ### [ 1.219768] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.22 [20211108_11:33:10] ### [ 1.219815] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec [20211108_11:33:10] ### [ 1.220004] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.23 [20211108_11:33:10] ### [ 1.220061] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd [20211108_11:33:10] ### [ 1.220197] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.18 [20211108_11:33:10] ### [ 1.220254] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8 [20211108_11:33:10] ### [ 1.220415] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.28 [20211108_11:33:10] ### [ 1.220476] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3 [20211108_11:33:10] ### [ 1.220637] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(3300000 uV) supplied by vcc_3v3 [20211108_11:33:10] ### [ 1.220792] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3 [20211108_11:33:10] ### [ 1.226536] rockchip-thermal fe710000.tsadc: tsadc is probed successfully! [20211108_11:33:10] ### [ 1.228380] Bluetooth: HCI UART driver ver 2.3 [20211108_11:33:10] ### [ 1.228416] Bluetooth: HCI UART protocol H4 registered [20211108_11:33:10] ### [ 1.228438] Bluetooth: HCI UART protocol ATH3K registered [20211108_11:33:10] ### [ 1.228756] Bluetooth: HCI UART protocol Broadcom registered [20211108_11:33:10] ### [ 1.228873] usbcore: registered new interface driver bfusb [20211108_11:33:10] ### [ 1.228989] usbcore: registered new interface driver btusb [20211108_11:33:10] ### [ 1.229456] cpu cpu0: leakage=22 [20211108_11:33:10] ### [ 1.229533] cpu cpu0: pvtm = 85410, from nvmem [20211108_11:33:10] ### [ 1.229569] cpu cpu0: pvtm-volt-sel=1 [20211108_11:33:10] ### [ 1.231818] sdhci: Secure Digital Host Controller Interface driver [20211108_11:33:10] ### [ 1.231836] sdhci: Copyright(c) Pierre Ossman [20211108_11:33:10] ### [ 1.231848] Synopsys Designware Multimedia Card Interface Driver [20211108_11:33:10] ### [ 1.233283] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mode. [20211108_11:33:10] ### [ 1.233584] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller. [20211108_11:33:10] ### [ 1.233610] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a [20211108_11:33:10] ### [ 1.233708] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 42,32 bit host data width,256 deep fifo [20211108_11:33:10] ### [ 1.233943] dwmmc_rockchip fe000000.dwmmc: allocated mmc-pwrseq [20211108_11:33:10] ### [ 1.233976] mmc_host mmc3: card is non-removable. [20211108_11:33:10] ### [ 1.338032] rk-pcie 3c0400000.pcie: PCIe Linking... LTSSM is 0x0 [20211108_11:33:10] ### [ 1.338084] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0 [20211108_11:33:10] ### [ 1.348114] usb 7-1: new low-speed USB device number 2 using xhci-hcd [20211108_11:33:10] ### [ 1.355328] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [20211108_11:33:10] ### [ 1.368859] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode. [20211108_11:33:10] ### [ 1.369531] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller. [20211108_11:33:10] ### [ 1.369573] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a [20211108_11:33:10] ### [ 1.369657] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 55,32 bit host data width,256 deep fifo [20211108_11:33:10] ### [ 1.369842] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.29 [20211108_11:33:10] ### [ 1.370025] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.23 [20211108_11:33:10] ### [ 1.378765] mmc3 mmc_send_io_op_cond err: -110 [20211108_11:33:10] ### [ 1.383461] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [20211108_11:33:10] ### [ 1.396574] sdhci-pltfm: SDHCI platform and OF driver helper [20211108_11:33:10] ### [ 1.398267] mmc0: Unknown controller version (5). You may experience problems. [20211108_11:33:10] ### [ 1.430477] mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA [20211108_11:33:10] ### [ 1.432790] hidraw: raw HID events driver (C) Jiri Kosina [20211108_11:33:10] ### [ 1.433462] usbcore: registered new interface driver usbhid [20211108_11:33:10] ### [ 1.433492] usbhid: USB HID core driver [20211108_11:33:10] ### [ 1.434033] rockchip,bus bus-npu: Linked as a consumer to regulator.14 [20211108_11:33:10] ### [ 1.434080] rockchip,bus bus-npu: Failed to get leakage [20211108_11:33:10] ### [ 1.434157] rockchip,bus bus-npu: pvtm = 85410, from nvmem [20211108_11:33:10] ### [ 1.434194] rockchip,bus bus-npu: pvtm-volt-sel=1 [20211108_11:33:10] ### [ 1.434508] rockchip,bus bus-npu: avs=0 [20211108_11:33:10] ### [ 1.438493] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.25 [20211108_11:33:10] ### [ 1.439484] rksfc_base v1.1 2016-01-08 [20211108_11:33:10] ### [ 1.440590] rksfc fe300000.sfc: rksfc_probe clk rate = 50000000 [20211108_11:33:10] ### [ 1.440682] rkflash_dev_init enter [20211108_11:33:10] ### [ 1.440720] sfc nor id: ff ff ff [20211108_11:33:10] ### [ 1.440741] rkflash[1] is invalid [20211108_11:33:10] ### [ 1.440744] rkflash_dev_init enter [20211108_11:33:10] ### [ 1.440779] sfc_nand id: ff ff ff [20211108_11:33:10] ### [ 1.440797] rkflash[2] is invalid [20211108_11:33:10] ### [ 1.442066] usbcore: registered new interface driver snd-usb-audio [20211108_11:33:10] ### [ 1.445590] rk817-codec rk817-codec: DMA mask not set [20211108_11:33:10] ### [ 1.456146] Initializing XFRM netlink socket [20211108_11:33:10] ### [ 1.456922] NET: Registered protocol family 10 [20211108_11:33:10] ### [ 1.458182] Segment Routing with IPv6 [20211108_11:33:10] ### [ 1.458336] NET: Registered protocol family 17 [20211108_11:33:10] ### [ 1.458384] NET: Registered protocol family 15 [20211108_11:33:10] ### [ 1.458438] can: controller area network core (rev 20170425 abi 9) [20211108_11:33:10] ### [ 1.458739] NET: Registered protocol family 29 [20211108_11:33:10] ### [ 1.458765] can: raw protocol (rev 20170425) [20211108_11:33:10] ### [ 1.458778] can: broadcast manager protocol (rev 20170425 t) [20211108_11:33:10] ### [ 1.458822] can: netlink gateway (rev 20170425) max_hops=1 [20211108_11:33:10] ### [ 1.459234] Bluetooth: RFCOMM socket layer initialized [20211108_11:33:10] ### [ 1.459298] Bluetooth: RFCOMM ver 1.11 [20211108_11:33:10] ### [ 1.459325] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [20211108_11:33:10] ### [ 1.459347] Bluetooth: HIDP socket layer initialized [20211108_11:33:10] ### [ 1.459429] [BT_RFKILL]: Enter rfkill_rk_init [20211108_11:33:10] ### [ 1.459453] [WLAN_RFKILL]: Enter rfkill_wlan_init [20211108_11:33:10] ### [ 1.460454] Key type dns_resolver registered [20211108_11:33:10] ### [ 1.460867] flash vendor_init_thread! [20211108_11:33:10] ### [ 1.460885] flash vendor storage:20170308 ret = -1 [20211108_11:33:10] ### [ 1.462855] Loading compiled-in X.509 certificates [20211108_11:33:10] ### [ 1.463846] pstore: Using compression: deflate [20211108_11:33:10] ### [ 1.465764] rga2: Driver loaded successfully ver:3.2.63318 [20211108_11:33:10] ### [ 1.466343] mmc0: new HS200 MMC card at address 0001 [20211108_11:33:10] ### [ 1.466731] rga2: Module initialized. [20211108_11:33:10] ### [ 1.467547] mmcblk0: mmc0:0001 SPeMMC 14.5 GiB [20211108_11:33:10] ### [ 1.468337] mmcblk0boot0: mmc0:0001 SPeMMC partition 1 4.00 MiB [20211108_11:33:10] ### [ 1.469075] mmcblk0boot1: mmc0:0001 SPeMMC partition 2 4.00 MiB [20211108_11:33:10] ### [ 1.469365] mmcblk0rpmb: mmc0:0001 SPeMMC partition 3 4.00 MiB, chardev (239:0) [20211108_11:33:10] ### [ 1.474127] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [20211108_11:33:10] ### [ 1.492373] usb 7-1: New USB device found, idVendor=09da, idProduct=0006, bcdDevice= 0.01 [20211108_11:33:10] ### [ 1.492422] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [20211108_11:33:10] ### [ 1.492438] usb 7-1: Product: USB Optical Mouse [20211108_11:33:10] ### [ 1.492451] usb 7-1: Manufacturer: USB Optical Mouse [20211108_11:33:10] ### [ 1.501433] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 300000Hz, actual 187500HZ div = 1) [20211108_11:33:10] ### [ 1.504836] usb 3-1: new full-speed USB device number 2 using ohci-platform [20211108_11:33:10] ### [ 1.513309] mpp_rkvenc fdf40000.rkvenc: probing start [20211108_11:33:10] ### [ 1.514367] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to regulator.14 [20211108_11:33:10] ### [ 1.514427] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage [20211108_11:33:10] ### [ 1.514505] mpp_rkvenc fdf40000.rkvenc: pvtm = 85410, from nvmem [20211108_11:33:10] ### [ 1.514543] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1 [20211108_11:33:10] ### [ 1.514923] mpp_rkvenc fdf40000.rkvenc: avs=0 [20211108_11:33:10] ### [ 1.515443] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node [20211108_11:33:10] ### [ 1.515464] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model [20211108_11:33:10] ### [ 1.515478] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficient [20211108_11:33:10] ### [ 1.516272] mpp_rkvenc fdf40000.rkvenc: probing finish [20211108_11:33:10] ### [ 1.516352] input: USB Optical Mouse USB Optical Mouse as /devices/platform/usbhost/fd000000.dwc3/xhci-hcd.5.auto/usb7/7-1/7-1:1.0/0003:09DA:0006.0001/input/input2 [20211108_11:33:10] ### [ 1.517033] hid-generic 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-xhci-hcd.5.auto-1/input0 [20211108_11:33:10] ### [ 1.517166] mali fde60000.gpu: Kernel DDK version g2p0-01eac0 [20211108_11:33:10] ### [ 1.517410] mali fde60000.gpu: Linked as a consumer to regulator.15 [20211108_11:33:10] ### [ 1.517664] mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shadercores) found: -19 [20211108_11:33:10] ### [ 1.517807] mali fde60000.gpu: leakage=6 [20211108_11:33:10] ### [ 1.517880] mali fde60000.gpu: pvtm = 85410, from nvmem [20211108_11:33:10] ### [ 1.517929] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [20211108_11:33:10] ### [ 1.518729] mali fde60000.gpu: avs=0 [20211108_11:33:10] ### [ 1.518773] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available. [20211108_11:33:10] ### [ 1.519258] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0 [20211108_11:33:10] ### [ 1.519400] mali fde60000.gpu: No memory group manager is configured [20211108_11:33:10] ### [ 1.520049] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0 [20211108_11:33:10] ### [ 1.521118] mali fde60000.gpu: Probed as mali0 [20211108_11:33:10] ### [ 1.526766] mmc3 mmc_send_io_op_cond err: -110 [20211108_11:33:10] ### [ 1.587455] vendor storage:20190527 ret = 0 [20211108_11:33:10] ### [ 1.622406] devfreq fde60000.gpu: Couldn't update frequency transition information. [20211108_11:33:10] ### [ 1.648101] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 200000Hz, actual 187500HZ div = 1) [20211108_11:33:10] ### [ 1.664709] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [20211108_11:33:10] ### [ 1.673489] mmc3 mmc_send_io_op_cond err: -110 [20211108_11:33:10] ### [ 1.731087] usb 3-1: New USB device found, idVendor=0b05, idProduct=185c, bcdDevice= 1.10 [20211108_11:33:10] ### [ 1.731121] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20211108_11:33:10] ### [ 1.731137] usb 3-1: Product: Bluetooth Radio [20211108_11:33:10] ### [ 1.731150] usb 3-1: Manufacturer: Realtek [20211108_11:33:10] ### [ 1.731164] usb 3-1: SerialNumber: 00e04c000001 [20211108_11:33:10] ### [ 1.794802] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 100000Hz, actual 93750HZ div = 2) [20211108_11:33:10] ### [ 1.815286] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [20211108_11:33:10] ### [ 1.823890] mmc3 mmc_send_io_op_cond err: -110 [20211108_11:33:10] ### [ 1.855261] Bluetooth: hci0: RTL: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822 [20211108_11:33:10] ### [ 1.855261] [20211108_11:33:10] ### [ 1.857207] Bluetooth: hci0: RTL: rom_version status=0 version=2 [20211108_11:33:10] ### [ 1.857207] [20211108_11:33:10] ### [ 1.857243] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_fw.bin [20211108_11:33:10] ### [ 1.857243] [20211108_11:33:10] ### [ 1.857391] bluetooth hci0: Direct firmware load for rtl_bt/rtl8822b_fw.bin failed with error -2 [20211108_11:33:10] ### [ 1.857424] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8822b_fw.bin not found [20211108_11:33:10] ### [ 1.857424] [20211108_11:33:11] ### [ 2.351391] rk-pcie 3c0400000.pcie: PCIe Link up, LTSSM is 0x30011 [20211108_11:33:11] ### [ 2.351411] rk-pcie 3c0800000.pcie: PCIe Link up, LTSSM is 0x30011 [20211108_11:33:11] ### [ 2.351676] rk-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20 [20211108_11:33:11] ### [ 2.351681] rk-pcie 3c0400000.pcie: PCI host bridge to bus 0001:10 [20211108_11:33:11] ### [ 2.351697] pci_bus 0001:10: root bus resource [bus 10-1f] [20211108_11:33:11] ### [ 2.351716] pci_bus 0002:20: root bus resource [bus 20-2f] [20211108_11:33:11] ### [ 2.351730] pci_bus 0001:10: root bus resource [??? 0x340000000-0x3407fffff flags 0x0] (bus address [0x40000000-0x407fffff]) [20211108_11:33:11] ### [ 2.351757] pci_bus 0002:20: root bus resource [??? 0x380000000-0x3807fffff flags 0x0] (bus address [0x80000000-0x807fffff]) [20211108_11:33:11] ### [ 2.351767] pci_bus 0002:20: root bus resource [io 0x100000-0x1fffff] (bus address [0x80800000-0x808fffff]) [20211108_11:33:11] ### [ 2.351778] pci_bus 0002:20: root bus resource [mem 0x380900000-0x3bfffffff] (bus address [0x80900000-0xbfffffff]) [20211108_11:33:11] ### [ 2.351835] pci_bus 0001:10: root bus resource [io 0x0000-0xfffff] (bus address [0x40800000-0x408fffff]) [20211108_11:33:11] ### [ 2.351862] pci_bus 0001:10: root bus resource [mem 0x340900000-0x37fffffff] (bus address [0x40900000-0x7fffffff]) [20211108_11:33:11] ### [ 2.369212] pci 0002:20:00.0: Primary bus is hard wired to 0 [20211108_11:33:11] ### [ 2.369270] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [20211108_11:33:11] ### [ 2.369472] pci 0001:10:00.0: Primary bus is hard wired to 0 [20211108_11:33:11] ### [ 2.369515] pci 0001:10:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [20211108_11:33:11] ### [ 2.370410] pci 0001:11:00.0: reg 0x10: initial BAR value 0x00000000 invalid [20211108_11:33:11] ### [ 2.390294] pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000 64bit] [20211108_11:33:11] ### [ 2.390351] pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000 64bit] [20211108_11:33:11] ### [ 2.390373] pci 0002:20:00.0: BAR 8: assigned [mem 0x380900000-0x380bfffff] [20211108_11:33:11] ### [ 2.390392] pci 0002:20:00.0: BAR 6: assigned [mem 0x380c00000-0x380c0ffff pref] [20211108_11:33:11] ### [ 2.390419] pci 0002:21:00.0: BAR 0: assigned [mem 0x380a00000-0x380bfffff 64bit] [20211108_11:33:11] ### [ 2.390518] pci 0002:21:00.0: BAR 6: assigned [mem 0x380900000-0x38090ffff pref] [20211108_11:33:11] ### [ 2.390548] pci 0002:20:00.0: PCI bridge to [bus 21] [20211108_11:33:11] ### [ 2.390577] pci 0002:20:00.0: bridge window [mem 0x380900000-0x380bfffff] [20211108_11:33:11] ### [ 2.395442] pcieport 0002:20:00.0: Signaling PME with IRQ 120 [20211108_11:33:11] ### [ 2.395857] pcieport 0002:20:00.0: AER enabled with IRQ 121 [20211108_11:33:11] ### [ 2.401048] pci 0001:10:00.0: BAR 8: assigned [mem 0x340900000-0x3409fffff] [20211108_11:33:11] ### [ 2.401110] pci 0001:10:00.0: BAR 6: assigned [mem 0x340a00000-0x340a0ffff pref] [20211108_11:33:11] ### [ 2.401132] pci 0001:10:00.0: BAR 7: assigned [io 0x1000-0x1fff] [20211108_11:33:11] ### [ 2.401159] pci 0001:11:00.0: BAR 2: assigned [mem 0x340900000-0x34090ffff 64bit] [20211108_11:33:11] ### [ 2.401261] pci 0001:11:00.0: BAR 0: assigned [io 0x1000-0x10ff] [20211108_11:33:11] ### [ 2.401346] pci 0001:10:00.0: PCI bridge to [bus 11] [20211108_11:33:11] ### [ 2.401379] pci 0001:10:00.0: bridge window [io 0x1000-0x1fff] [20211108_11:33:11] ### [ 2.401408] pci 0001:10:00.0: bridge window [mem 0x340900000-0x3409fffff] [20211108_11:33:11] ### [ 2.404954] pcieport 0001:10:00.0: Signaling PME with IRQ 131 [20211108_11:33:11] ### [ 2.405236] pcieport 0001:10:00.0: AER enabled with IRQ 132 [20211108_11:33:11] ### [ 2.787418] BPI-R2PRO RK3568's RTL8367RB Switch Init Successfully !!! [20211108_11:33:11] ### [ 2.954363] input: adc-keys as /devices/platform/adc-keys/input/input3 [20211108_11:33:11] ### [ 2.962441] asoc-simple-card rk809-sound: rk817-hifi <-> fe410000.i2s mapping ok [20211108_11:33:11] ### [ 2.968787] iommu: Adding device fde40000.npu to group 0 [20211108_11:33:11] ### [ 2.968860] RKNPU fde40000.npu: Linked as a consumer to fde4b000.iommu [20211108_11:33:11] ### [ 2.969543] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode [20211108_11:33:11] ### [ 2.969756] RKNPU fde40000.npu: Linked as a consumer to regulator.17 [20211108_11:33:11] ### [ 2.969805] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff] [20211108_11:33:11] ### [ 2.970637] [drm] Initialized rknpu 0.4.2 20210701 for fde40000.npu on minor 1 [20211108_11:33:11] ### [ 2.970742] RKNPU fde40000.npu: leakage=3 [20211108_11:33:11] ### [ 2.970816] RKNPU fde40000.npu: pvtm = 85410, from nvmem [20211108_11:33:11] ### [ 2.971705] RKNPU fde40000.npu: avs=0 [20211108_11:33:11] ### [ 2.972452] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 [20211108_11:33:11] ### [ 2.973356] cfg80211: Loading compiled-in X.509 certificates for regulatory database [20211108_11:33:11] ### [ 2.975872] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [20211108_11:33:11] ### [ 2.976075] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [20211108_11:33:11] ### [ 2.976106] cfg80211: failed to load regulatory.db [20211108_11:33:11] ### [ 2.977350] rockchip-pm rockchip-suspend: not set pwm-regulator-config [20211108_11:33:11] ### [ 2.979676] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '13:49:58', on 'Oct 27 2021'. [20211108_11:33:11] ### [ 2.980270] Mali: [20211108_11:33:11] ### [ 2.980273] Mali device driver loaded [20211108_11:33:11] ### [ 2.980319] rkisp rkisp-vir0: clear unready subdev num: 1 [20211108_11:33:11] ### [ 2.980789] rkisp-vir0: update sensor failed [20211108_11:33:11] ### [ 2.981044] ALSA device list: [20211108_11:33:11] ### [ 2.981069] #0: rockchip,rk809-codec [20211108_11:33:12] ### [ 3.207838] EXT4-fs (mmcblk0p6): 1 orphan inode deleted [20211108_11:33:12] ### [ 3.207884] EXT4-fs (mmcblk0p6): recovery complete [20211108_11:33:12] ### [ 3.213811] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [20211108_11:33:12] ### [ 3.213905] VFS: Mounted root (ext4 filesystem) on device 179:6. [20211108_11:33:12] ### [ 3.215008] devtmpfs: mounted [20211108_11:33:12] ### [ 3.218730] Freeing unused kernel memory: 1600K [20211108_11:33:12] ### [ 3.221523] Run /sbin/init as init process [20211108_11:33:12] ### [ 3.466146] systemd[1]: System time before build time, advancing clock. [20211108_11:33:12] ### [ 3.474271] systemd[1]: Failed to lookup module alias 'autofs4': Function not implemented [20211108_11:33:12] ### [20211108_11:33:12] ### Welcome to Debian GNU/Linux 10 (buster)! [20211108_11:33:12] ### [20211108_11:33:12] ### File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [20211108_11:33:12] ### Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [20211108_11:33:12] ### [ OK ] Started Forward Password R…uests to Wall Directory Watch. [20211108_11:33:12] ### [ OK ] Listening on Journal Socket (/dev/log). [20211108_11:33:12] ### [ OK ] Reached target Swap. [20211108_11:33:12] ### [ OK ] Listening on Journal Socket. [20211108_11:33:12] ### Starting Wait Until Kernel Time Synchronized... [20211108_11:33:12] ### Starting Remount Root and Kernel File Systems... [20211108_11:33:12] ### Starting Set the console keyboard layout... [20211108_11:33:12] ### Starting Load Kernel Modules... [20211108_11:33:12] ### [ OK ] Created slice system-getty.slice. [20211108_11:33:12] ### [ OK ] Reached target Remote Encrypted Volumes. [20211108_11:33:12] ### [ OK ] Reached target Remote File Systems. [20211108_11:33:12] ### Mounting Kernel Debug File System... [20211108_11:33:12] ### [ OK ] Created slice User and Session Slice. [20211108_11:33:12] ### [ OK ] Reached target Slices. [20211108_11:33:12] ### [ OK ] Listening on Syslog Socket. [20211108_11:33:12] ### [ OK ] Listening on Network Service Netlink Socket. [20211108_11:33:12] ### [ OK ] Started Dispatch Password …ts to Console Directory Watch. [20211108_11:33:12] ### [ OK ] Reached target Local Encrypted Volumes. [20211108_11:33:12] ### [ OK ] Listening on initctl Compatibility Named Pipe. [20211108_11:33:12] ### Starting Journal Service... [20211108_11:33:12] ### Starting Nameserver information manager... [20211108_11:33:12] ### [ OK ] Listening on udev Kernel Socket. [20211108_11:33:12] ### [ OK ] Listening on udev Control Socket. [20211108_11:33:12] ### Starting udev Coldplug all Devices... [20211108_11:33:12] ### [ OK ] Created slice system-serial\x2dgetty.slice. [20211108_11:33:12] ### [ OK ] Started Remount Root and Kernel File Systems. [20211108_11:33:13] ### [ OK ] Started Load Kernel Modules. [20211108_11:33:13] ### [ OK ] Mounted Kernel Debug File System. [20211108_11:33:13] ### Starting Apply Kernel Variables... [20211108_11:33:13] ### Mounting Kernel Configuration File System... [20211108_11:33:13] ### Mounting FUSE Control File System... [20211108_11:33:13] ### Starting Load/Save Random Seed... [20211108_11:33:13] ### Starting Create System Users... [20211108_11:33:13] ### [ OK ] Started Nameserver information manager. [20211108_11:33:13] ### [ OK ] Mounted Kernel Configuration File System. [20211108_11:33:13] ### [ OK ] Mounted FUSE Control File System. [20211108_11:33:13] ### [ OK ] Started Apply Kernel Variables. [20211108_11:33:13] ### [ OK ] Started Load/Save Random Seed. [20211108_11:33:13] ### [ OK ] Started Create System Users. [20211108_11:33:13] ### Starting Create Static Device Nodes in /dev... [20211108_11:33:13] ### [ OK ] Started Create Static Device Nodes in /dev. [20211108_11:33:13] ### Starting udev Kernel Device Manager... [20211108_11:33:13] ### [ OK ] Started udev Kernel Device Manager. [20211108_11:33:13] ### Starting Network Service... [20211108_11:33:13] ### [ OK ] Started Set the console keyboard layout. [20211108_11:33:13] ### [ OK ] Reached target Local File Systems (Pre). [20211108_11:33:13] ### [ OK ] Reached target Local File Systems. [20211108_11:33:13] ### Starting Enable support fo…l executable binary formats... [20211108_11:33:13] ### Starting Set console font and keymap... [20211108_11:33:13] ### [ OK ] Started Enable support for…nal executable binary formats. [20211108_11:33:13] ### [ OK ] Started Set console font and keymap. [20211108_11:33:13] ### [ OK ] Started Network Service. [20211108_11:33:14] ### [ OK ] Started udev Coldplug all Devices. [20211108_11:33:14] ### Starting Helper to synchronize boot up for ifupdown... [20211108_11:33:14] ### [ OK ] Started Journal Service. [20211108_11:33:14] ### Starting Flush Journal to Persistent Storage... [20211108_11:33:14] ### [ OK ] Started Helper to synchronize boot up for ifupdown. [20211108_11:33:14] ### Starting Raise network interfaces... [20211108_11:33:14] ### [ 5.401563] systemd-journald[141]: Received request to flush runtime journal from PID 1 [20211108_11:33:14] ### [ OK ] Started Flush Journal to Persistent Storage. [20211108_11:33:14] ### Starting Create Volatile Files and Directories... [20211108_11:33:14] ### [ OK ] Started Create Volatile Files and Directories. [20211108_11:33:15] ### [ OK ] Started Raise network interfaces. [20211108_11:33:15] ### [ OK ] Found device /dev/ttyFIQ0. [20211108_11:33:15] ### [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [20211108_11:33:15] ### [ OK ] Created slice system-zram\x2dsetup.slice. [20211108_11:33:15] ### Starting Network Name Resolution... [20211108_11:33:15] ### Starting Update UTMP about System Boot/Shutdown... [20211108_11:33:15] ### Starting Load/Save RF Kill Switch Status... [20211108_11:33:15] ### [ OK ] Started Load/Save RF Kill Switch Status. [20211108_11:33:15] ### [ OK ] Started Update UTMP about System Boot/Shutdown. [20211108_11:33:15] ### [ OK ] Reached target System Initialization. [20211108_11:33:15] ### [ OK ] Started ACPI Events Check. [20211108_11:33:15] ### [ OK ] Reached target Paths. [20211108_11:33:15] ### [ OK ] Started Daily Cleanup of Temporary Directories. [20211108_11:33:15] ### [ OK ] Listening on D-Bus System Message Bus Socket. [20211108_11:33:15] ### [ OK ] Listening on ACPID Listen Socket. [20211108_11:33:15] ### [ OK ] Listening on triggerhappy.socket. [20211108_11:33:15] ### [ OK ] Listening on OpenBSD Secure Shell server socket. [20211108_11:33:15] ### [ OK ] Reached target Sockets. [20211108_11:33:15] ### [ OK ] Reached target Basic System. [20211108_11:33:15] ### [ OK ] Started D-Bus System Message Bus. [20211108_11:33:15] ### Starting Initialize hardware monitoring sensors... [20211108_11:33:15] ### Starting Disk Manager... [20211108_11:33:15] ### Starting System Logging Service... [20211108_11:33:15] ### [ OK ] Started Manage Sound Card State (restore and store). [20211108_11:33:15] ### [ OK ] Started ACPI event daemon. [20211108_11:33:15] ### Starting Daemon for power management... [20211108_11:33:15] ### Starting triggerhappy global hotkey daemon... [20211108_11:33:16] ### Starting Setup zram based device zram0... [20211108_11:33:16] ### Starting enable ASYNC for Debian Display... [20211108_11:33:16] ### Starting Login Service... [20211108_11:33:16] ### Starting rkisp 3A engine... [20211108_11:33:16] ### Starting Bluetooth service... [20211108_11:33:16] ### Starting LSB: Load kernel …d to enable cpufreq scaling... [20211108_11:33:16] ### Starting WPA supplicant... [20211108_11:33:16] ### Starting Network Manager... [20211108_11:33:16] ### Starting adbd for Debian... [20211108_11:33:16] ### Starting Save/Restore Sound Card State... [20211108_11:33:16] ### [ OK ] Started System Logging Service. [20211108_11:33:16] ### [ OK ] Started triggerhappy global hotkey daemon. [20211108_11:33:16] ### [ OK ] Started rkisp 3A engine. [20211108_11:33:16] ### [ OK ] Started Save/Restore Sound Card State. [20211108_11:33:16] ### [ OK ] Started Initialize hardware monitoring sensors. [20211108_11:33:16] ### [ OK ] Started Login Service. [20211108_11:33:16] ### [ OK ] Started enable ASYNC for Debian Display. [20211108_11:33:16] ### [ OK ] Started Setup zram based device zram0. [20211108_11:33:16] ### [ OK ] Started WPA supplicant. [20211108_11:33:16] ### [ OK ] Started Bluetooth service. [20211108_11:33:16] ### [ OK ] Reached target Bluetooth. [20211108_11:33:16] ### Starting Authorization Manager... [20211108_11:33:16] ### [ OK ] Reached target Sound Card. [20211108_11:33:16] ### [ OK ] Started Setup rockchip platform environment. [20211108_11:33:16] ### Starting Hostname Service... [20211108_11:33:16] ### [ 7.696769] file system registered [20211108_11:33:16] ### [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. [20211108_11:33:16] ### Starting LSB: set CPUFreq kernel parameters... [20211108_11:33:16] ### [ OK ] Started Authorization Manager. [20211108_11:33:16] ### [ 7.849856] Mass Storage Function, version: 2009/09/11 [20211108_11:33:16] ### [ 7.849916] LUN: removable file: (no medium) [20211108_11:33:16] ### [ OK ] Started Network Manager. [20211108_11:33:16] ### [ 7.994524] mass_storage.0/lun.0: unable to open backing file: /dev/block/by-name/userdata [20211108_11:33:16] ### [ OK ] Started LSB: set CPUFreq kernel parameters. [20211108_11:33:16] ### [ 8.112035] read descriptors [20211108_11:33:16] ### [ 8.112162] read strings [20211108_11:33:20] ### [ OK ] Started adbd for Debian. [20211108_11:33:20] ### [ OK ] Started Network Name Resolution. [20211108_11:33:20] ### [ OK ] Started Hostname Service. [20211108_11:33:20] ### [ OK ] Started Disk Manager. [20211108_11:33:20] ### [ OK ] Started Daemon for power management. [20211108_11:33:20] ### Starting Network Manager Script Dispatcher Service... [20211108_11:33:20] ### [ OK ] Reached target Network. [20211108_11:33:20] ### Starting vsftpd FTP server... [20211108_11:33:20] ### Starting Network Time Service... [20211108_11:33:20] ### Starting /etc/rc.local Compatibility... [20211108_11:33:20] ### Starting Permit User Sessions... [20211108_11:33:20] ### [ OK ] Reached target Host and Network Name Lookups. [20211108_11:33:20] ### [ OK ] Started vsftpd FTP server. [20211108_11:33:20] ### [ OK ] Started /etc/rc.local Compatibility. [20211108_11:33:20] ### [ OK ] Started Permit User Sessions. [20211108_11:33:20] ### [ OK ] Started Network Manager Script Dispatcher Service. [20211108_11:33:20] ### [ OK ] Started Network Time Service. [20211108_11:33:20] ### Starting Light Display Manager... [20211108_11:33:20] ### [ OK ] Started Serial Getty on ttyFIQ0. [20211108_11:33:20] ### [ OK ] Started Getty on tty1. [20211108_11:33:20] ### [ OK ] Reached target Login Prompts. [20211108_11:33:20] ### [ 12.108126] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [20211108_11:33:20] ### [ 12.110182] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL) [20211108_11:33:21] ### [ 12.126890] dwmac4: Master AXI performs any burst length [20211108_11:33:21] ### [ 12.126975] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found [20211108_11:33:21] ### [ 12.127017] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [20211108_11:33:21] ### [ 12.127404] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock [20211108_11:33:21] ### [ 12.128285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [20211108_11:33:21] ### [ 12.184718] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [20211108_11:33:21] ### [ 12.186938] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [20211108_11:33:21] ### [ OK ] Started Light Display Manager. [20211108_11:33:21] ### [ 12.208358] dwmac4: Master AXI performs any burst length [20211108_11:33:21] ### [ 12.208431] rk_gmac-dwmac fe2a0000.ethernet eth1: No Safety Features support found [20211108_11:33:21] ### [ 12.208471] rk_gmac-dwmac fe2a0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [20211108_11:33:21] ### [ 12.209526] rk_gmac-dwmac fe2a0000.ethernet eth1: registered PTP clock [20211108_11:33:21] ### [ 12.212313] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [20211108_11:33:21] ### Starting enable ASYNC for Debian Display... [20211108_11:33:21] ### [ 12.764858] broken atomic modeset userspace detected, disabling atomic [20211108_11:33:21] ### [ OK ] Started enable ASYNC for Debian Display. [20211108_11:33:22] ### [ 13.151970] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [20211108_11:33:22] ### [ 13.152771] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [20211108_11:33:22] ### [ 13.233204] rk_gmac-dwmac fe2a0000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [20211108_11:33:22] ### [ 13.233325] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [20211108_11:33:22] ### [ 14.034491] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property hdmi_color_depth_capacity [20211108_11:33:22] ### [ 14.034599] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property hdmi_output_mode_capacity [20211108_11:33:23] ### [ 14.167817] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property output_type_capacity [20211108_11:33:24] ### [ 15.435092] Freeing drm_logo memory: 1668K [20211108_11:33:25] ### [ OK ] Created slice User Slice of UID 1000. [20211108_11:33:25] ### Starting User Runtime Directory /run/user/1000... [20211108_11:33:25] ### [ OK ] Started User Runtime Directory /run/user/1000. [20211108_11:33:25] ### [ 17.035902] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2 [20211108_11:33:25] ### [20211108_11:33:25] ### Debian GNU/Linux 10 linaro-alip ttyFIQ0 [20211108_11:33:25] ### [20211108_11:33:25] ### linaro-alip login: root (automatic login) [20211108_11:33:25] ### [20211108_11:33:25] ### Last login: Thu Feb 14 10:12:08 UTC 2019 on ttyFIQ0 [20211108_11:33:25] ### Linux linaro-alip 4.19.193 #2 SMP Wed Nov 3 15:16:24 CST 2021 aarch64 [20211108_11:33:25] ### [20211108_11:33:25] ### The programs included with the Debian GNU/Linux system are free software; [20211108_11:33:25] ### the exact distribution terms for each program are described in the [20211108_11:33:26] ### individual files in /usr/share/doc/*/copyright. [20211108_11:33:26] ### [20211108_11:33:26] ### Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent [20211108_11:33:26] ### permitted by applicable law. [20211108_11:33:32] ### root@linaro-alip:~# [ 23.916434] EXT4-fs (mmcblk0p7): mounting ext2 file system using the ext4 subsystem [20211108_11:33:32] ### [ 23.928130] EXT4-fs (mmcblk0p7): warning: mounting unchecked fs, running e2fsck is recommended [20211108_11:33:32] ### [ 23.935969] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null) [20211108_11:33:42] ### [ 33.764713] vcc3v3_lcd0_n: disabling [20211108_11:33:42] ### [ 33.764763] vcc3v3_lcd1_n: disabling [20211108_11:35:20] ### [20211108_11:35:23] ### root@linaro-alip:~# ifconfig [20211108_11:35:23] ### eth0: flags=4163 mtu 1500 [20211108_11:35:23] ### inet6 fe80::f4f5:9624:8b93:80c6 prefixlen 64 scopeid 0x20 [20211108_11:35:23] ### ether a2:9a:33:d6:8b:e9 txqueuelen 1000 (Ethernet) [20211108_11:35:23] ### RX packets 0 bytes 0 (0.0 B) [20211108_11:35:23] ### RX errors 0 dropped 0 overruns 0 frame 0 [20211108_11:35:23] ### TX packets 55 bytes 8483 (8.2 KiB) [20211108_11:35:23] ### TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [20211108_11:35:23] ### device interrupt 38 [20211108_11:35:23] ### [20211108_11:35:23] ### eth1: flags=4163 mtu 1500 [20211108_11:35:23] ### inet 192.168.5.113 netmask 255.255.255.0 broadcast 192.168.5.255 [20211108_11:35:23] ### inet6 fe80::fad6:b22d:fbb8:fe43 prefixlen 64 scopeid 0x20 [20211108_11:35:23] ### ether 9e:9a:33:d6:8b:e9 txqueuelen 1000 (Ethernet) [20211108_11:35:23] ### RX packets 75 bytes 8796 (8.5 KiB) [20211108_11:35:23] ### RX errors 0 dropped 0 overruns 0 frame 0 [20211108_11:35:23] ### TX packets 77 bytes 7168 (7.0 KiB) [20211108_11:35:23] ### TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [20211108_11:35:23] ### device interrupt 53 [20211108_11:35:23] ### [20211108_11:35:23] ### lo: flags=73 mtu 65536 [20211108_11:35:23] ### inet 127.0.0.1 netmask 255.0.0.0 [20211108_11:35:23] ### inet6 ::1 prefixlen 128 scopeid 0x10 [20211108_11:35:23] ### loop txqueuelen 1000 (Local Loopback) [20211108_11:35:23] ### RX packets 8 bytes 536 (536.0 B) [20211108_11:35:23] ### RX errors 0 dropped 0 overruns 0 frame 0 [20211108_11:35:23] ### TX packets 8 bytes 536 (536.0 B) [20211108_11:35:23] ### TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [20211108_11:35:23] ### [20211108_11:35:30] ### root@linaro-alip:~# lsb_release -a [20211108_11:35:30] ### No LSB modules are available. [20211108_11:35:30] ### Distributor ID: Debian [20211108_11:35:30] ### Description: Debian GNU/Linux 10 (buster) [20211108_11:35:30] ### Release: 10 [20211108_11:35:30] ### Codename: buster [20211108_11:35:31] ### root@linaro-alip:~#