设备刷好lakka系统的Bpi-M1一台,官方USB无线网卡一个,配对好的dualshock3手柄与适配器一对。
镜像下载http://www.lakka.tv/get/
前置配置:连接到lakka的命令行界面1进入lakka命令行界面Accessing Lakka command line interface.rar (14 KB),文档未翻译完全
启动蓝牙服务
systemctl enable bluetooth
systemctl start bluetooth
检查服务是否活动
systemctl status bluetooth
如出现大致以下信息说明服务已启动
● bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2016-03-15 08:52:37 UTC; 10s ago
Main PID: 382 (bluetoothd)
Status: "Running"
CGroup: /system.slice/bluetooth.service
└─382 /usr/lib/bluetooth/bluetoothd
如出现以下信息
● bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
Active: inactive (dead)
说明你需要创建一个配置文件并重启服务
touch /storage/.cache/services/bluez.conf
systemctl start bluetooth
配对控制器
启动bluetoothctl
bluetoothctl
,会出现一条名为bluetooth的提示,然后逐条输入
agent on
default-agent
power on
discoverable on
pairable on
使用usb线将dualshock3手柄连接到设备上,然后按下PS键,在连接信息中找到设备MAC地址复制下。你将会看到要求你授权设备的提示
待续